OBD-I Codes List

Ford 211 Profile ignition pickup circuit failure

Make
Ford (1981-1995)
Category
Powertrain - Ignition
Severity
Check Engine Light

How to read it

Code 211 reads as 2 flashes, pause, 1 flash, pause, 1 flash on the check-engine light. Jumper the self-test input to signal return at the test connector, then run the key on engine off self test and the running self test, counting the check-engine flashes each time.

New to flash codes? The How to Read Ford EEC-IV Self-Test Codes walks through the test and what the numbers mean. The general OBD-I guide covers the rest.

What does Ford code 211 mean?

Profile ignition pickup circuit failure

Common causes of 211

  • Wiring
  • Poor connection
  • Arcing secondary ignition component coil/cap/rotor/HT leads/ plugs
  • Electrical interference
  • ECM

How to fix 211

  1. Check the circuit wiring and harness for damage, chafing or a poor splice
  2. Check the connector pins for corrosion, spread terminals or a poor fit
  3. Check the ignition secondary for arcing, worn cap, rotor, leads or plugs
  4. Check the grounds and look for electrical interference
  5. Test the ECM last, only after every circuit test has passed
  6. Clear the code, then retest to confirm the fix holds

Source

Source review recorded

Sources and review

Review: checked against the recorded source material.

Last updated 2026-09-29.

Report a correction for 211. Include your vehicle, the issue and a source if you have one.