OBD-I Codes List

Ford 222 Loss of ignition diagnostic module signal RH side (dual plug EI)

Make
Ford (1981-1995)
Category
Powertrain - Ignition
Severity
Check Engine Light

How to read it

Code 222 reads as 2 flashes, pause, 2 flashes, pause, 2 flashes on the check-engine light. Jumper the self-test input to signal return at the test connector, then run the key on engine off self test and the running self test, counting the check-engine flashes each time.

New to flash codes? The How to Read Ford EEC-IV Self-Test Codes walks through the test and what the numbers mean. The general OBD-I guide covers the rest.

What does Ford code 222 mean?

Loss of ignition diagnostic module signal RH side (dual plug EI)

Common causes of 222

  • The ignition diagnostic module signal on the right hand side was lost.
  • The ignition coil on the right hand side failed.
  • The wiring from the right side coil to the PCM is damaged.
  • The ECM cannot read the right side diagnostic signal.

How to fix 222

  1. Check the right hand ignition coil and its connector.
  2. Check the wiring from the right side coil to the PCM for damage.
  3. Test the right hand ignition coil and replace it only if it fails its own test.
  4. Test the ECM last, only after every circuit test has passed.
  5. Clear the code, then retest to confirm the right side signal returns.

Source

Source review recorded

Sources and review

Review: checked against the recorded source material.

Last updated 2026-10-10.

Report a correction for 222. Include your vehicle, the issue and a source if you have one.