OBD-I Codes List

Ford 223 Loss of dual plug ignition control (dual plug EI)

Make
Ford (1981-1995)
Category
Powertrain - Ignition
Severity
Check Engine Light

How to read it

Code 223 reads as 2 flashes, pause, 2 flashes, pause, 3 flashes on the check-engine light. Jumper the self-test input to signal return at the test connector, then run the key on engine off self test and the running self test, counting the check-engine flashes each time.

New to flash codes? The How to Read Ford EEC-IV Self-Test Codes walks through the test and what the numbers mean. The general OBD-I guide covers the rest.

What does Ford code 223 mean?

Loss of dual plug ignition control (dual plug EI)

Common causes of 223

  • The dual plug ignition control signal was lost.
  • The ICM stopped driving the dual plug ignition.
  • The wiring from the ICM to the PCM is damaged.
  • The PCM cannot control the dual plug ignition.

How to fix 223

  1. Check the dual plug ignition control wiring between the ICM and the PCM.
  2. Check the connectors at the ICM and the coil pack for a poor fit.
  3. Test the ICM and replace it only if it fails its own test.
  4. Test the ECM last, only after every circuit test has passed.
  5. Clear the code, then retest to confirm dual plug control returns.

Source

Source review recorded

Sources and review

Review: checked against the recorded source material.

Last updated 2026-10-10.

Report a correction for 223. Include your vehicle, the issue and a source if you have one.