OBD-I Codes List

Ford 311 Secondary air system inoperative, including during the KOER test on bank 1 with dual oxygen sensors

Make
Ford (1981-1995)
Category
Powertrain - Auxiliary Emissions Controls
Severity
Check Engine Light

How to read it

Code 311 reads as 3 flashes, pause, 1 flash, pause, 1 flash on the check-engine light. Jumper the self-test input to signal return at the test connector, then run the key on engine off self test and the running self test, counting the check-engine flashes each time.

New to flash codes? The How to Read Ford EEC-IV Self-Test Codes walks through the test and what the numbers mean. The general OBD-I guide covers the rest.

What does Ford code 311 mean?

Secondary air system inoperative, including during the KOER test on bank 1 with dual oxygen sensors

Common causes of 311

  • Hose blocked/leaking
  • AIR bypass/divert solenoid
  • AIR pump
  • ECM

How to fix 311

  1. Check the hose for a blockage or a leak
  2. Check the AIR system for a stuck valve, a blocked passage or a dead pump
  3. Test the ECM last, only after every circuit test has passed
  4. Clear the code, then retest to confirm the fix holds

Source

Source review recorded

Sources and review

Review: checked against the recorded source material.

Last updated 2026-09-29.

Report a correction for 311. Include your vehicle, the issue and a source if you have one.