OBD-I Codes List

Ford 314 AIR system inoperative during KOER

Make
Ford (1981-1995)
Category
Powertrain - Auxiliary Emissions Controls
Severity
Check Engine Light

How to read it

Code 314 reads as 3 flashes, pause, 1 flash, pause, 4 flashes on the check-engine light. Jumper the self-test input to signal return at the test connector, then run the key on engine off self test and the running self test, counting the check-engine flashes each time.

New to flash codes? The How to Read Ford EEC-IV Self-Test Codes walks through the test and what the numbers mean. The general OBD-I guide covers the rest.

What does Ford code 314 mean?

AIR system inoperative during KOER

Common causes of 314

  • Hose blocked or leaking
  • AIR bypass/divert solenoid
  • AIR pump
  • ECM

How to fix 314

  1. Check the hose for a blockage or a leak
  2. Check the AIR system for a stuck valve, a blocked passage or a dead pump
  3. Test the ECM last, only after every circuit test has passed
  4. Clear the code, then retest to confirm the fix holds

Source

Source review recorded

Sources and review

Review: checked against the recorded source material.

Last updated 2026-09-29.

Report a correction for 314. Include your vehicle, the issue and a source if you have one.