OBD-I Codes List

Ford 332 Insufficient EGR flow detected

Make
Ford (1981-1995)
Category
Powertrain - Auxiliary Emissions Controls
Severity
Check Engine Light

How to read it

Code 332 reads as 3 flashes, pause, 3 flashes, pause, 2 flashes on the check-engine light. Jumper the self-test input to signal return at the test connector, then run the key on engine off self test and the running self test, counting the check-engine flashes each time.

New to flash codes? The How to Read Ford EEC-IV Self-Test Codes walks through the test and what the numbers mean. The general OBD-I guide covers the rest.

What does Ford code 332 mean?

Insufficient EGR flow detected

Common causes of 332

  • Hose blocked or leaking
  • Wiring
  • EGR solenoid filter
  • EGR solenoid
  • EGR valve/position sensor
  • ECM

How to fix 332

  1. Check the hose for a blockage or a leak
  2. Check the circuit wiring and harness for damage, chafing or a poor splice
  3. Test the EGR solenoid filter and replace it only if it fails its own test
  4. Test the EGR solenoid and replace it only if it fails its own test
  5. Test the EGR valve/position sensor and replace it only if it fails its own test
  6. Test the ECM last, only after every circuit test has passed
  7. Clear the code, then retest to confirm the fix holds

Source

Qualified source review

Sources and review

Review: qualified. Read the source limits below.

Last updated 2026-09-29.

Report a correction for 332. Include your vehicle, the issue and a source if you have one.