OBD-I Codes List

Ford 565 Canister purge circuit failure KOEO

Make
Ford (1981-1995)
Category
Powertrain - Auxiliary Emissions Controls
Severity
Check Engine Light

How to read it

Code 565 reads as 5 flashes, pause, 6 flashes, pause, 5 flashes on the check-engine light. Jumper the self-test input to signal return at the test connector, then run the key on engine off self test and the running self test, counting the check-engine flashes each time.

New to flash codes? The How to Read Ford EEC-IV Self-Test Codes walks through the test and what the numbers mean. The general OBD-I guide covers the rest.

What does Ford code 565 mean?

Canister purge circuit failure KOEO

Common causes of 565

  • A damaged or disconnected canister purge vacuum hose
  • An open or short in the EVAP canister purge solenoid circuit
  • A stuck or failed EVAP canister purge valve
  • An internal fault in the PCM canister purge driver

How to fix 565

  1. Check the canister purge vacuum hoses for damage, a blockage or a wrong connection
  2. Check the canister purge solenoid circuit wiring for an open or short
  3. Test the EVAP canister purge valve and replace it only if it fails its own test
  4. Test the PCM last, only after every circuit test has passed
  5. Clear the code, then retest to confirm the fix holds

Source

Source review recorded

Sources and review

Review: checked against the recorded source material.

Last updated 2026-10-10.

Report a correction for 565. Include your vehicle, the issue and a source if you have one.