OBD-I Codes List

Ford 82 Secondary air bypass circuit failure

Make
Ford (1981-1995)
Category
Powertrain - Auxiliary Emissions Controls
Severity
Check Engine Light

How to read it

Code 82 reads as 8 flashes, pause, 2 flashes on the check-engine light. Jumper the self-test input to signal return at the test connector, then run the key on engine off self test and the running self test, counting the check-engine flashes each time.

New to flash codes? The How to Read Ford EEC-IV Self-Test Codes walks through the test and what the numbers mean. The general OBD-I guide covers the rest.

What does Ford code 82 mean?

Secondary air bypass circuit failure

Common causes of 82

  • The AIR bypass circuit is open or damaged.
  • The AIR bypass solenoid failed.
  • The wiring to the AIR bypass solenoid is damaged.
  • The ECM cannot command the AIR bypass.

How to fix 82

  1. Check the wiring and connector at the AIR bypass solenoid.
  2. Check the AIR bypass passages for a blockage.
  3. Test the AIR bypass solenoid and replace it only if it fails its own test.
  4. Test the ECM last, only after every circuit test has passed.
  5. Clear the code, then retest to confirm the AIR bypass works.

Source

Source review recorded

Sources and review

Review: checked against the recorded source material.

Last updated 2026-10-10.

Report a correction for 82. Include your vehicle, the issue and a source if you have one.