OBD-I Codes List

Ford 121 Closed throttle voltage out of range or throttle position voltage inconsistent with the mass air flow sensor

Make
Ford (1981-1995)
Category
Powertrain - Fuel/Air Metering
Severity
Check Engine Light

How to read it

Code 121 reads as 1 flash, pause, 2 flashes, pause, 1 flash on the check-engine light. Jumper the self-test input to signal return at the test connector, then run the key on engine off self test and the running self test, counting the check-engine flashes each time.

New to flash codes? The How to Read Ford EEC-IV Self-Test Codes walks through the test and what the numbers mean. The general OBD-I guide covers the rest.

What does Ford code 121 mean?

Closed throttle voltage out of range or throttle position voltage inconsistent with the mass air flow sensor

Common causes of 121

  • Throttle valve tight/sticking
  • TP sensor loose/ damaged
  • ECM

How to fix 121

  1. Check the throttle linkage and its adjustment, and look for a sticking valve
  2. Test the TP sensor loose/ and replace it only if it fails its own test
  3. Test the ECM last, only after every circuit test has passed
  4. Clear the code, then retest to confirm the fix holds

Source

Source review recorded

Sources and review

Review: checked against the recorded source material.

Last updated 2026-09-29.

Report a correction for 121. Include your vehicle, the issue and a source if you have one.