OBD-I Codes List

Ford 141 Flexible fuel control system fault

Make
Ford (1981-1995)
Category
Powertrain - Fuel/Air Metering
Severity
Check Engine Light

How to read it

Code 141 reads as 1 flash, pause, 4 flashes, pause, 1 flash on the check-engine light. Jumper the self-test input to signal return at the test connector, then run the key on engine off self test and the running self test, counting the check-engine flashes each time.

New to flash codes? The How to Read Ford EEC-IV Self-Test Codes walks through the test and what the numbers mean. The general OBD-I guide covers the rest.

What does Ford code 141 mean?

Flexible fuel control system fault

Common causes of 141

  • Intake leak
  • Fuel pressure low
  • Fuel filter/pump
  • Injectors
  • HO2S
  • ECM

How to fix 141

  1. Check for an intake leak
  2. Measure fuel pressure and compare it with the spec: this fault reads low
  3. Check the fuel filter and the fuel pump delivery
  4. Check the injectors for a clogged or a leaking one
  5. Test the HO2S and replace it only if it fails its own test
  6. Test the ECM last, only after every circuit test has passed
  7. Clear the code, then retest to confirm the fix holds

Source

Source review recorded

Sources and review

Review: checked against the recorded source material.

Last updated 2026-09-29.

Report a correction for 141. Include your vehicle, the issue and a source if you have one.