OBD-I Codes List

Ford 176 System indicates lean (bank no

Make
Ford (1981-1995)
Category
Powertrain - Fuel/Air Metering
Severity
Check Engine Light

How to read it

Code 176 reads as 1 flash, pause, 7 flashes, pause, 6 flashes on the check-engine light. Jumper the self-test input to signal return at the test connector, then run the key on engine off self test and the running self test, counting the check-engine flashes each time.

New to flash codes? The How to Read Ford EEC-IV Self-Test Codes walks through the test and what the numbers mean. The general OBD-I guide covers the rest.

What does Ford code 176 mean?

System indicates lean (bank no. 2)

Common causes of 176

  • An intake leak on bank 2 lets unmetered air in and drives bank 2 lean.
  • Fuel pressure is low, so bank 2 runs lean of the ECM target.
  • A clogged fuel filter or a weak pump starves bank 2.
  • A clogged injector on bank 2 skews that bank lean.
  • A slow or lazy HO2S on bank 2 cannot correct the mixture.

How to fix 176

  1. Check the bank 2 intake for a leak.
  2. Measure fuel pressure and compare it with spec, since this fault reads low.
  3. Check the fuel filter and the fuel pump delivery.
  4. Test the bank 2 HO2S and replace it only if it fails its own test.
  5. Test the ECM last, only after every circuit test has passed.
  6. Clear the code, then retest to confirm bank 2 runs at the target mixture.

Source

Source review recorded

Sources and review

Review: checked against the recorded source material.

Last updated 2026-10-10.

Report a correction for 176. Include your vehicle, the issue and a source if you have one.