OBD-I Codes List

Ford 186 Injector pulse width higher than expected (with BARO sensor)

Make
Ford (1981-1995)
Category
Powertrain - Fuel/Air Metering
Severity
Check Engine Light

How to read it

Code 186 reads as 1 flash, pause, 8 flashes, pause, 6 flashes on the check-engine light. Jumper the self-test input to signal return at the test connector, then run the key on engine off self test and the running self test, counting the check-engine flashes each time.

New to flash codes? The How to Read Ford EEC-IV Self-Test Codes walks through the test and what the numbers mean. The general OBD-I guide covers the rest.

What does Ford code 186 mean?

Injector pulse width higher than expected (with BARO sensor)

Common causes of 186

  • Intake leak
  • Fuel pressure low
  • MAF sensor
  • ECM

How to fix 186

  1. Check for an intake leak
  2. Measure fuel pressure and compare it with the spec: this fault reads low
  3. Test the MAF sensor and replace it only if it fails its own test
  4. Test the ECM last, only after every circuit test has passed
  5. Clear the code, then retest to confirm the fix holds

Source

Source review recorded

Sources and review

Review: checked against the recorded source material.

Last updated 2026-09-29.

Report a correction for 186. Include your vehicle, the issue and a source if you have one.