OBD-I Codes List

Ford 192 Fuel system at rich adaptive limit (front)

Make
Ford (1981-1995)
Category
Powertrain - Fuel/Air Metering
Severity
Check Engine Light

How to read it

Code 192 reads as 1 flash, pause, 9 flashes, pause, 2 flashes on the check-engine light. Jumper the self-test input to signal return at the test connector, then run the key on engine off self test and the running self test, counting the check-engine flashes each time.

New to flash codes? The How to Read Ford EEC-IV Self-Test Codes walks through the test and what the numbers mean. The general OBD-I guide covers the rest.

What does Ford code 192 mean?

Fuel system at rich adaptive limit (front)

Common causes of 192

  • A blocked intake at the front of the engine holds the adaptive limit rich.
  • High fuel pressure at the front injectors keeps the ECM pulling fuel.
  • A leaking front injector overfuels and pins the adaptive limit.
  • The MAP sensor signal is off and holds the adaptive limit at the rich stop.

How to fix 192

  1. Check the front intake for a blockage.
  2. Measure fuel pressure and compare it with spec, since this fault reads high.
  3. Check the front injectors for a clogged or a leaking one.
  4. Test the MAP sensor and replace it only if it fails its own test.
  5. Test the ECM last, only after every circuit test has passed.
  6. Clear the code, then retest to confirm the front adaptive limit returns to center.

Source

Source review recorded

Sources and review

Review: checked against the recorded source material.

Last updated 2026-10-10.

Report a correction for 192. Include your vehicle, the issue and a source if you have one.