OBD-I Codes List

Ford 39 AXOD converter bypass clutch not applying properly

Make
Ford (1981-1995)
Category
Powertrain - Transmission
Severity
Check Engine Light

How to read it

Code 39 reads as 3 flashes, pause, 9 flashes on the check-engine light. Jumper the self-test input to signal return at the test connector, then run the key on engine off self test and the running self test, counting the check-engine flashes each time.

New to flash codes? The How to Read Ford EEC-IV Self-Test Codes walks through the test and what the numbers mean. The general OBD-I guide covers the rest.

What does Ford code 39 mean?

AXOD converter bypass clutch not applying properly

Common causes of 39

  • Low or dirty transmission fluid
  • Faulty converter bypass clutch solenoid
  • Open or shorted clutch circuit wiring
  • Internal transmission fault
  • PCM transmission control fault

How to fix 39

  1. Confirm the code and check the transmission fluid level and condition
  2. Inspect the clutch solenoid wiring and connector for damage and corrosion
  3. Test the bypass clutch solenoid circuit
  4. Service the fluid before condemning internal parts
  5. Repair or replace the failed part only after the circuit test fails

Source

Source review recorded

Sources and review

Review: checked against the recorded source material.

Last updated 2026-09-25.

Report a correction for 39. Include your vehicle, the issue and a source if you have one.