OBD-I Codes List

Ford 557 Low speed fuel pump primary circuit failure

Make
Ford (1981-1995)
Category
Powertrain - Fuel/Air Metering
Severity
Check Engine Light

How to read it

Code 557 reads as 5 flashes, pause, 5 flashes, pause, 7 flashes on the check-engine light. Jumper the self-test input to signal return at the test connector, then run the key on engine off self test and the running self test, counting the check-engine flashes each time.

New to flash codes? The How to Read Ford EEC-IV Self-Test Codes walks through the test and what the numbers mean. The general OBD-I guide covers the rest.

What does Ford code 557 mean?

Low speed fuel pump primary circuit failure

Common causes of 557

  • Wiring
  • FP relay/constant control relay module
  • ECM

How to fix 557

  1. Check the circuit wiring and harness for damage, chafing or a poor splice
  2. Check for FP relay/constant control relay module
  3. Test the ECM last, only after every circuit test has passed
  4. Clear the code, then retest to confirm the fix holds

Source

Source review recorded

Sources and review

Review: checked against the recorded source material.

Last updated 2026-09-29.

Report a correction for 557. Include your vehicle, the issue and a source if you have one.