OBD-I Codes List

Ford 73 Insufficient throttle position change during the dynamic response test

Make
Ford (1981-1995)
Category
Powertrain - Fuel/Air Metering
Severity
Check Engine Light

How to read it

Code 73 reads as 7 flashes, pause, 3 flashes on the check-engine light. Jumper the self-test input to signal return at the test connector, then run the key on engine off self test and the running self test, counting the check-engine flashes each time.

New to flash codes? The How to Read Ford EEC-IV Self-Test Codes walks through the test and what the numbers mean. The general OBD-I guide covers the rest.

What does Ford code 73 mean?

Insufficient throttle position change during the dynamic response test

Common causes of 73

  • Incorrect throttle operation
  • Wiring
  • TP sensor
  • ECM

How to fix 73

  1. Check the throttle linkage and its adjustment, and look for a sticking valve
  2. Check the circuit wiring and harness for damage, chafing or a poor splice
  3. Test the TP sensor and replace it only if it fails its own test
  4. Test the ECM last, only after every circuit test has passed
  5. Clear the code, then retest to confirm the fix holds

Source

Source review recorded

Sources and review

Review: checked against the recorded source material.

Last updated 2026-09-29.

Report a correction for 73. Include your vehicle, the issue and a source if you have one.