OBD-I Codes List

Ford 87 Primary fuel pump circuit failure

Make
Ford (1981-1995)
Category
Powertrain - Fuel/Air Metering
Severity
Check Engine Light

How to read it

Code 87 reads as 8 flashes, pause, 7 flashes on the check-engine light. Jumper the self-test input to signal return at the test connector, then run the key on engine off self test and the running self test, counting the check-engine flashes each time.

New to flash codes? The How to Read Ford EEC-IV Self-Test Codes walks through the test and what the numbers mean. The general OBD-I guide covers the rest.

What does Ford code 87 mean?

Primary fuel pump circuit failure

Common causes of 87

  • The primary fuel pump circuit failed and the pump does not run.
  • The inertia fuel shutoff (IF5) switch tripped or its contacts are open.
  • The fuel pump itself failed.
  • The wiring in the primary fuel pump circuit is damaged or disconnected.

How to fix 87

  1. Check the inertia fuel shutoff (IF5) switch and reset it if it tripped.
  2. Check the wiring and connector at the fuel pump.
  3. Check the fuel filter and the fuel pump delivery.
  4. Test the fuel pump and replace it only if it fails its own test.
  5. Test the ECM last, only after every circuit test has passed.
  6. Clear the code, then retest to confirm the primary pump circuit works.

Source

Source review recorded

Sources and review

Review: checked against the recorded source material.

Last updated 2026-10-10.

Report a correction for 87. Include your vehicle, the issue and a source if you have one.