OBD-I Codes List

Ford 95 Fuel pump circuit open between PCM and motor ground

Make
Ford (1981-1995)
Category
Powertrain - Fuel/Air Metering
Severity
Check Engine Light

How to read it

Code 95 reads as 9 flashes, pause, 5 flashes on the check-engine light. Jumper the self-test input to signal return at the test connector, then run the key on engine off self test and the running self test, counting the check-engine flashes each time.

New to flash codes? The How to Read Ford EEC-IV Self-Test Codes walks through the test and what the numbers mean. The general OBD-I guide covers the rest.

What does Ford code 95 mean?

Fuel pump circuit open between PCM and motor ground

Common causes of 95

  • The fuel pump circuit is open between the PCM and the pump motor ground.
  • The inertia fuel shutoff (IF5) switch is open or its contacts are bad.
  • The fuel pump ground or the wiring to it is damaged.
  • The PCM cannot complete the fuel pump circuit.

How to fix 95

  1. Check the fuel pump circuit between the PCM and the motor ground for an open.
  2. Check the inertia fuel shutoff (IF5) switch and reset it if it tripped.
  3. Check the wiring and the ground at the fuel pump.
  4. Test the fuel pump and replace it only if it fails its own test.
  5. Test the PCM last, only after every circuit test has passed.
  6. Clear the code, then retest to confirm the pump circuit is complete.

Source

Source review recorded

Sources and review

Review: checked against the recorded source material.

Last updated 2026-10-10.

Report a correction for 95. Include your vehicle, the issue and a source if you have one.