OBD-I Codes List

Ford 620 Torque converter clutch excessive clutch slip

Make
Ford (1981-1995)
Category
Powertrain - Transmission
Severity
Check Engine Light

How to read it

Code 620 reads as 6 flashes, pause, 2 flashes, pause, 0 flashes on the check-engine light. Jumper the self-test input to signal return at the test connector, then run the key on engine off self test and the running self test, counting the check-engine flashes each time.

New to flash codes? The How to Read Ford EEC-IV Self-Test Codes walks through the test and what the numbers mean. The general OBD-I guide covers the rest.

What does Ford code 620 mean?

Torque converter clutch excessive clutch slip

Common causes of 620

  • Low or worn fluid that lets the torque converter clutch slip
  • A worn or glazed torque converter clutch facing
  • An internal fault in the PCM converter clutch control

How to fix 620

  1. Check the transmission fluid level and condition, and watch for converter clutch slip under load
  2. Test the torque converter clutch for lockup and replace it only if it fails its own test
  3. Test the PCM last, only after every circuit test has passed
  4. Clear the code, then retest to confirm the fix holds

Source

Qualified source review

Sources and review

Review: qualified. Read the source limits below.

Last updated 2026-10-10.

Report a correction for 620. Include your vehicle, the issue and a source if you have one.