OBD-I Codes List

Ford 623 Transmission control indicator lamp circuit failure

Make
Ford (1981-1995)
Category
Powertrain - Transmission
Severity
Check Engine Light

How to read it

Code 623 reads as 6 flashes, pause, 2 flashes, pause, 3 flashes on the check-engine light. Jumper the self-test input to signal return at the test connector, then run the key on engine off self test and the running self test, counting the check-engine flashes each time.

New to flash codes? The How to Read Ford EEC-IV Self-Test Codes walks through the test and what the numbers mean. The general OBD-I guide covers the rest.

What does Ford code 623 mean?

Transmission control indicator lamp circuit failure

Common causes of 623

  • A burned out transmission control indicator bulb
  • A blown fuse feeding the indicator lamp circuit
  • A wiring fault in the indicator lamp circuit
  • An internal fault in the PCM indicator lamp driver

How to fix 623

  1. Check the bulb in the transmission control indicator
  2. Check the fuse that feeds the indicator lamp circuit
  3. Check the indicator lamp circuit wiring for damage or a poor splice
  4. Test the PCM last, only after every circuit test has passed
  5. Clear the code, then retest to confirm the fix holds

Source

Qualified source review

Sources and review

Review: qualified. Read the source limits below.

Last updated 2026-10-10.

Report a correction for 623. Include your vehicle, the issue and a source if you have one.