Ford 662 Shift solenoid 2 circuit failure
How to read it
Code 662 reads as 6 flashes, pause, 6 flashes, pause, 2 flashes on the check-engine light. Jumper the self-test input to signal return at the test connector, then run the key on engine off self test and the running self test, counting the check-engine flashes each time.
New to flash codes? The How to Read Ford EEC-IV Self-Test Codes walks through the test and what the numbers mean. The general OBD-I guide covers the rest.
What does Ford code 662 mean?
Shift solenoid 2 circuit failure
Common causes of 662
- Faulty shift solenoid 2
- Open or shorted wiring in the shift solenoid 2 circuit
- Corroded or loose connector at the shift solenoid 2
- Low or dirty transmission fluid
- Faulty PCM transmission control
How to fix 662
- Confirm the code and check the transmission fluid level and condition
- Inspect the shift solenoid 2 and its wiring for damage and corrosion
- Test the shift solenoid 2 circuit
- Service the fluid before condemning internal parts
- Replace a failed part only after the circuit test fails
Source
Qualified source review
Sources and review
Review: qualified. Read the source limits below.
- EEC-IV Ford trouble code table (MIL, description, type)
archived reference page (troublecodes.net via Wayback Machine)
Supports: code identity and meaning
Fetched directly. The three-digit row matches the description used in the data file.
https://web.archive.org/web/20030720231430id_/http://www.troublecodes.net:80/Ford/eec-iv.shtml
Last updated 2026-09-29.
Report a correction for 662. Include your vehicle, the issue and a source if you have one.
