OBD-I Codes List

Ford 680 Automatic transmission fluid temperature high

Make
Ford (1981-1995)
Category
Powertrain - Transmission
Severity
Check Engine Light

How to read it

Code 680 reads as 6 flashes, pause, 8 flashes, pause, 0 flashes on the check-engine light. Jumper the self-test input to signal return at the test connector, then run the key on engine off self test and the running self test, counting the check-engine flashes each time.

New to flash codes? The How to Read Ford EEC-IV Self-Test Codes walks through the test and what the numbers mean. The general OBD-I guide covers the rest.

What does Ford code 680 mean?

Automatic transmission fluid temperature high

Common causes of 680

  • Automatic transmission fluid temperature above the safe range
  • Low fluid level that lets the fluid overheat
  • A restricted transmission cooler or cooler line
  • Heavy towing that pushes fluid temperature up
  • A failed transmission fluid temperature sensor

How to fix 680

  1. Check the automatic transmission fluid level and condition
  2. Check the transmission cooler and cooler lines for restriction
  3. Check for slip under load that builds fluid heat
  4. Test the transmission fluid temperature sensor and replace it only if it fails its own test
  5. Test the PCM last, only after every circuit test has passed
  6. Clear the code, then retest to confirm the fix holds

Source

Qualified source review

Sources and review

Review: qualified. Read the source limits below.

Last updated 2026-10-10.

Report a correction for 680. Include your vehicle, the issue and a source if you have one.