OBD-I Codes List

Ford 89 Converter clutch override circuit failure or exhaust heat control fault

Make
Ford (1981-1995)
Category
Powertrain - Transmission
Severity
Check Engine Light

How to read it

Code 89 reads as 8 flashes, pause, 9 flashes on the check-engine light. Jumper the self-test input to signal return at the test connector, then run the key on engine off self test and the running self test, counting the check-engine flashes each time.

New to flash codes? The How to Read Ford EEC-IV Self-Test Codes walks through the test and what the numbers mean. The general OBD-I guide covers the rest.

What does Ford code 89 mean?

Converter clutch override circuit failure or exhaust heat control fault

Common causes of 89

  • Wiring
  • TCC lock - up solenoid
  • ECM

How to fix 89

  1. Check the circuit wiring and harness for damage, chafing or a poor splice
  2. Test the TCC lock - up solenoid and replace it only if it fails its own test
  3. Test the ECM last, only after every circuit test has passed
  4. Clear the code, then retest to confirm the fix holds

Source

Source review recorded

Sources and review

Review: checked against the recorded source material.

Last updated 2026-09-29.

Report a correction for 89. Include your vehicle, the issue and a source if you have one.