OBD-I Codes List

Ford 93 Throttle position sensor input low or converter clutch solenoid circuit failure

Make
Ford (1981-1995)
Category
Powertrain - Transmission
Severity
Check Engine Light

How to read it

Code 93 reads as 9 flashes, pause, 3 flashes on the check-engine light. Jumper the self-test input to signal return at the test connector, then run the key on engine off self test and the running self test, counting the check-engine flashes each time.

New to flash codes? The How to Read Ford EEC-IV Self-Test Codes walks through the test and what the numbers mean. The general OBD-I guide covers the rest.

What does Ford code 93 mean?

Throttle position sensor input low or converter clutch solenoid circuit failure

Common causes of 93

  • Faulty throttle position sensor at idle
  • Open or shorted throttle position sensor wiring
  • Faulty converter clutch solenoid
  • Open or shorted clutch circuit wiring
  • PCM output fault

How to fix 93

  1. Confirm the code and decide whether it points to throttle or transmission
  2. Check the throttle position sensor signal at idle
  3. Inspect the converter clutch solenoid wiring
  4. Repair wiring before replacing parts
  5. Replace a failed part only after the circuit tests

Source

Source review recorded

Sources and review

Review: checked against the recorded source material.

Last updated 2026-09-25.

Report a correction for 93. Include your vehicle, the issue and a source if you have one.