OBD-I Codes List

Ford 970 Overdrive indicator lamp circuit malfunction

Make
Ford (1981-1995)
Category
Body
Severity
Check Engine Light

How to read it

Code 970 reads as 9 flashes, pause, 7 flashes, pause, 0 flashes on the check-engine light. Jumper the self-test input to signal return at the test connector, then run the key on engine off self test and the running self test, counting the check-engine flashes each time.

New to flash codes? The How to Read Ford EEC-IV Self-Test Codes walks through the test and what the numbers mean. The general OBD-I guide covers the rest.

What does Ford code 970 mean?

Overdrive indicator lamp circuit malfunction

Common causes of 970

  • A burned out overdrive indicator bulb
  • A blown fuse feeding the overdrive indicator lamp circuit
  • A wiring fault in the overdrive indicator lamp circuit
  • An internal fault in the PCM overdrive indicator driver

How to fix 970

  1. Check the overdrive indicator bulb
  2. Check the fuse that feeds the overdrive indicator lamp circuit
  3. Check the overdrive indicator lamp circuit wiring for damage or a poor splice
  4. Test the PCM last, only after every circuit test has passed
  5. Clear the code, then retest to confirm the fix holds

Source

Qualified source review

Sources and review

Review: qualified. Read the source limits below.

Last updated 2026-10-10.

Report a correction for 970. Include your vehicle, the issue and a source if you have one.